Changing Display Resolution in a VPS
--> Using noVNC
To change the display resolution, follow these steps using your client area and the built-in noVNC console.
1 Stop Your VPS
In the client area dashboard, locate your VPS and press the Stop button to turn off the VPS.
2 Open noVNC Console
Click on the Open noVNC Console button in your VPS control panel to launch the remote screen.
3 Start VPS & Press ESC
Start the VPS and continuously press the ESC key until the firmware setup screen appears.
4 Firmware Setup Menu
Once in the firmware screen, you’ll see options to configure system devices. Use arrow keys to navigate and proceed.
5 Select Device Manager
In the list of options, choose Device Manager and press Enter.
6 Choose OVMF Configuration
Select OVMF Platform Configuration from the list to access display and resolution settings.
7 Set Preferred Resolution
Choose your desired screen resolution for the next boot and press F10 to save the settings.
8 Confirm Changes
When asked, press Y and then hit Enter to confirm and apply the new resolution.
9 Boot into VPS
Click the right arrow on noVNC, press A, then the 3-dot menu and select boot into VPS.
✔ Resolution successfully updated. Your VPS will now use the new screen resolution after completing these steps and restarting the system.
